How To Set Temperature High and Low Alerts (XL824/XL850/XL950/XL1050)

Temperature High and Low Alerts

To receive an alert when your Indoor Temperature drops below or rises above certain temperatures, you will need to enable "Send High and Low Threshold Alerts" in the Trane® Home web portal.

NOTE: This article applies only to XL824, XL850, XL950, and XL1050 thermostats. 

• If you need assistance with setting these alerts on an XL624 or XR724, please refer to How To Set Temperature High and Low Alerts (XL624 and XR724 Only)
• If you need assistance with setting these alerts on a Trane Link (UX360) thermostat, please refer to How To Set Temperature High and Low Alerts (Link Thermostats)

1. Log in to the Trane Home web portal.
2. If you have multiple homes, select the home you want to change.
   
   
3. Click Climate on the left side of the page.
   
   
4. Identify the thermostat you want to modify and click Menu.
   
   
5. Select Settings.
   
   
6. Click Alert Settings.
   
   
7.  Click the circle next to Send High and Low Temperature Alerts to enable alerts.  If alerts are already enabled, you can disable them by clicking the circle to uncheck the option.
   
   
8. Once alerts are enabled, you will see the high and low threshold temperatures appear.  By default, alerts will be sent when the temperature goes below 45° F or above 100° F, but you can change these using the up and down arrows for each setting.
   
   

   • NOTE: To avoid numerous alerts throughout the day, it is important that there is enough difference between your temperature settings and your High/Low alert thresholds.  Allow a minimum of 5 degrees difference between your alert temperatures and your setpoints.  For example, if you set your heat to 70° and cool to 65°, your High threshold should be no less than 75° and your Low threshold should be no higher than 60°.

9. Click Apply.
   
   

If you have any questions or need assistance, please contact Trane Home Customer Support via email at help@tranehome.com or call 1-877-288-7707, Monday-Friday 9 AM – 8 PM ET, and Saturday 10 AM – 5 PM ET.